ENGLISH
29
RETROFITTING A DIGITAL RECEIVER
Operating the receiver with the television remote
control
Note:
The receiver must be connected and installed to the G bus on the
television set via the communication line.
Ǽ
Switches the television off (standby).
1…0
Switches the television on from standby mode.
Selects channels directly.
?
Displays information on the selected function.
You receive the station information of the digital
receiver after changing station or by looking in the
electronic TV guide.
E
Opens the »Format« menu.
Then use
P+
or
P-
to make the selection.
PIP
Displays an inset picture.
Returns to normal picture.
AV
Opens the pre-selection for AV channels.
Then select with
P+
or
P-
.
d
Sound on/off (mute).
i
Opens the television »EASY DIALOG« menu
(main menu).
You can find the main menu of the digital receiver in
the »EASY DIALOG« menu.
Z
Switches back one menu level in the receiver.
P+, P-
Switch the television on from standby;
Select stations step by step;
Move the cursor in the menus up and down.
Ǹ Ƿ
Adjust the volume;
Move the cursor left/right.
OK
Opens the station or favourites list on the receiver;
activates various functions.
TXT
Switches between teletext mode and TV mode on the
television (only the television teletext can be used).
TV-G
Opens and closes the electronic TV guide on the
receiver.
