97
DE
EN
• Night mode
Use this programme to wash
the cottons with lesser energy
consumption and silently. Spin steps
are cancelled for a silent washing
and the cycle ends with the Rinse
Hold step. After completion of the
programme, run Spin cycle to spin
the laundry.
Recommendations for the
amount of laundry and detergent
The amount of loaded laundry is
measured when the loading door is
open and the Load indicator shows
the amount.
This information disappears when
the loading door is closed.
The detergent indicator shows
the recommended amount of
detergent according to the selected
programme, soiling level and the
amount of loaded laundry.
One line corresponds to a full
powder detergent measurement cup
supplied with your product.
If you use liquid detergent, follow
the amounts recommended by the
detergent manufacturer on basis of
the soiling level.
C
Recommended detergent
amount is not displayed after
the programme has started.
Time display
Remaining time for the completion
of the programme while it is running
is displayed as “01:30” in hours and
minutes format.
C
Programme time may
differ from the values in the
"Programme and consumption
table" depending on the water
pressure, water hardness
and temperature, ambient
temperature, amount and
the type of laundry, auxiliary
functions selected and the
changes at the mains voltage.
End Time
With the
End Time
function, the
startup of the programme may
be delayed up to 24 hours. After
pressing
End Time
button, the
displayed time is the programme's
estimated end time. If the
End Time
is adjusted,
End Time
indicator is
illuminated.
“End Time Setting”
appears on the display.
End time setting
In order for the End Time function
is activated and the programme is
completed at the end of the specified
time, the
Start indicator
begins
flashing.
End time enabled
If you want to cancel End Time
function, press
End Time
button until
the End Time indicator turns off or
press
On / Off
button to turn off and
on the machine.