ENGLISH
27
8
Connect the aerial cable supplied with the »
Ö
« socket on the video recorder
and the aerial socket (
) on the TV set.
9
Reconnect the video recorder to the mains socket.
Note:
Please observe the setting described in the “Adjusting the DECODER/EURO-
AV2 socket for external devices” on page 35.
Recording satellite programmes
Preparation
Select the »AV« programme position for video playback on the TV set.
Insert a cassette with sufficient playing time and intact erase tab (cassette not
erase-protected) into the cassette compartment until it is fully pulled in.
Control
1
Switch the satellite receiver on and select the desired satellite programme.
2
Press the »
0
« button then select programme position »
AV 2
« with the »
D
D
«
button.
3
Press the »
●
RECORD
« button a longer time to start recording.
4
End recording with the »
■
« button.
Recordings controlled from a satellite receiver
If a satellite receiver equipped with a timer is connected to the
»
DECODER/
Y
EURO-AV2
« socket, it is possible to control the recording
on the video recorder via the timer.
Preparation
Insert a cassette with sufficient playing time and intact erase tab (cassette not
erase-protected) into the cassette compartment until it is fully pulled in.
Control
1
Switch the video recorder off using the »
88
« button.
– The time is visible in the video recorder’s display.
2
Press the »
II
« button a longer time.
– »
REC
« flashes in the video recorder’s display.
– The recorder is in recording standby. The recording is controlled from the
satellite receiver.
3
Press the »
II
« button to cancel the function.
SATELLITE RECEIVER
__________________________________________________________________
