Grundig GTN 38240 GCW, Руководство пользователя

Страница: 14 / 36

14 / 36 EN
Dryer / User Manual
Preparation
C
Laundry must be spun at the highest
spin speed that the washing machine
allows on basis of the fabric type.
4.4 Things to be done for
energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
ƒ Operate the product at a capacity
suitable for the programme you have
selected and pay attention not to
overload.
ƒ
Spin your laundry at the highest speed
possible when washing them. Thus, the
drying time is shortened and energy
consumption is reduced.
ƒ
Dry the same type of laundry together.
ƒ
Follow the instructions in the user manual
for programme selection.
ƒ Leave sufficient clearance at the front and
rear side of the dryer for air circulation.
Do not block the ventilation grills at the
front side of the product.
ƒ Do not open the loading door of the
machine during drying unless necessary.
If you must certainly open the loading
door, do not to keep it open for a long
time.
ƒ
Do not add new (wet) laundry during
drying.
ƒ
Lint and fiber released from the laundry
to the air during the drying cycle are
collected in the Lint Filter. Clean the lint
filter before or after each drying cycle.
ƒ
Clean the filter drawer regularly either
when the Filter Drawer Cleaning warning
symbol appears or after every 5 drying
cycles.
ƒ Ventilate the room, where the dryer is
located, well during drying.
4.5 First use
Before starting to use the product, make sure
that all preparations are in place pursuant to
the instructions in sections “Important Safety
Instructions” and “Installation”.
4.6 Correct load capacity
Follow the instructions in the “Programme
selection and consumption table”. Do not load
more than the capacity values stated in the
table.
C
It is not recommended to load the
dryer with laundry exceeding the
level indicated in the figure. Drying
performance will degrade when the
machine is overloaded. Furthermore,
dryer and the laundry can get
damaged.