43 / 64 EN
Dryer / User Manual
Installation
A
cAUTIoN:
Hose must be fixed in
every type of connection. Your house
will be flooded if the hose comes
loose during water discharge.
C
Attach the water drain hose to a
height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on, twisted or bent
between the drain and the machine.
3.6 Adjusting the feet
In order to ensure that the product operates
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusting the feet.
Turn the feet to left or right until the machine
stands level and firmly.
A
cAUTIoN:
Never unscrew the
adjustable feet from their housings.
3.7 electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values
in the “Technical specifications” table. Our
company shall not be liable for any damages
that will arise when the product is used without
grounding in accordance with the local
regulations.
Connection must comply with national
regulations.
Power cable plug must be within easy
reach after installation.
The voltage and allowed fuse or breaker
protection are specified in the “Technical
specifications” section. If the current of the
fuse is less than 10 Amperes, please have
a qualified electrician install a 10 Ampere
fuse.
The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
The main fuse and switches must have a
contact distance of minimum 3 mm.
B
cAUTIoN:
If the product is faulty,
it must not be operated unless it is
repaired! There is the risk of electric
shock!
3.8 Transportation of the
product
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and
chimney connections.
3. Drain the water in the product completely.
A
cAUTIoN:
We recommend carrying
the product in upright position. If it is
not possible to carry the machine in
the upright position, we recommend
carrying it by tilting towards the right
side when looked from the front. After
the product is moved to its new place,
wait for 12 hours before starting it.
