42 / 64 EN
Dryer / User Manual
Installation
3.5 connecting to the drain
In products equipped with condenser unit,
water accumulates in the water tank during the
drying cycle. You should drain accumulated
water after each drying cycle.
You can directly drain accumulated water
through the water drain hose supplied with the
product instead of periodically draining the
water collected in the water tank.
connecting the water drain hose
1. Pull hose in the product by hand in
order to disconnect it from where it
is connected. Do not use any tools to
remove the hose.
2. Connect one end of the drain hose
supplied separately with the product to
the connection point from where you
removed the hose of the product in
previous step.
3. Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
3.3 Under counter installation
This product can be installed under a
counter if the height of the counter is
sufficient.
A
cAUTIoN:
While using the under
counter dryer, never operate
the dryer without under counter
installation part.
Dryer Depth
60 cm
54 cm
Stock number
of under-bench
installation part
2979700200 2973600200
Leave at least 3 cm of space around the
sides and the rear wall of the product
when installing it under a counter or in a
cupboard.
3.4 mounting over a washing
machine
A fixing device should be used between
the two machines when installing the
dryer above a washing machine.
The fixing device (2977200100
white/2977200400 grey) must be
installed by the Authorized Service Agent.
Total weight of the washing machine
and the dryer -with full load- when they
are placed on top of each other reaches
to approx. 180 kilograms. Place the
products on a solid floor that has sufficient
load carrying capacity!
