
DISHWASHER / USER'S MANUAL
17 / 39 EN
Preparation
C
Information about suitable
places (detergent dispenser,
basket etc.) in the dishwasher to
place the tablet can be found
amongst the usage instructions
on the packages of the tablet
detergents.
Tablet detergent types commonly found in
the market:
2in1:
Contains detergent, rinse aid or water
softening salt
3in1:
Contains detergent, rinse aid and
water softening salt
4in1:
Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1:
Contains glass and stainless steel
protectors in addition to detergent, rinse aid
and water softening salt
C
Observe the instructions of the
detergent manufacturer on the
package when using tablet
detergents.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
C
Depending on the model, salt
indicator and/or rinse aid
indicator must be enabled again
if they were disabled before.
Rinse aid
C
The rinse aid used in dishwashers
is a special combination used
to increase drying efficiency
and prevent water or limescale
stains on the washed items. For
this reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid reservoir by
pressing its latch (B).
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by pressing
on it lightly.
C
Wipe clean any spilled rinse
aid outside the reservoir. Rinse
aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.