Grundig GSS STC 160, Инструкция по сборке

Страница: 19 / 24

- 19 - STC 160
6.3 lnb p
ower supply ConneCtions
• Connect the DC cable % of a retrofitted input distributor to one of the con-
tacts
^
(12V/800 mA total).
%
^
6.4 rf
ConneCtions
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using F terminals.
Note:
The F terminal at the rear panel are intended to use for RF input and RF output.
The following connection example shows a possible connection scheme.
• Connect the SAT IF cables coming from the LNBs to the relevant F terminals
(fig. 23,
4
).
4 6 4 5 3 2 1 7
Fig. 22