Grundig GSS SID 162 Скачать руководство пользователя страница 9

Страница: 9 / 10

- 9 -

SID 162

inal

proCedures

After installing the head-end station, retrofitting accessories or installing mod-

ules it is necessary to tighten all cable connections, F terminals and cover screws
in order to maintain compliance with current EMC regulations and to ensure a
reliable operation.

•

Securely tighten the cable connections (F connector) using an open-ended
spanner (spanner gap 11 mm).

• Programme the modules connected and the head-end station if necessary.

• Position the breakthroughs in the base plate above the fastening screws

• Push the base plate in direction of the arrow and lock it with the locking

screw

• Tighten the fastening screws

• Tighten the nuts of retrofitted F terminals if applicable.

• Mount the front cover (see the assembly instructions of the head-end station).

Содержание GSS SID 162











Результаты поиска

Содержание GSS SID 162

Отзывы:

Похожие инструкции для GSS SID 162

Бренды по названию

Популярные бренды

Grundig GSS SID 162, Инструкция по сборке

Результаты поиска

Содержание GSS SID 162

Отзывы:

Похожие инструкции для GSS SID 162

Бренды по названию

Популярные бренды