Grundig GNF 41810 W, Руководство пользователя

Страница: 13 / 44

DISHWASHER / USER'S MANUAL 13 / 44 EN
Preparation
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing programme
immediately after adding the salt, run the
machine empty in the shortest programme to
dissolve and wash away the scattered salt in
the machine.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
Adding salt
Water softening system needs to be
regenerated in order for the product
to operate with the same performance
continuously. Dishwasher salt is used for this
purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may get
worse in time.
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid in counter
clockwise to open it (A, B).
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
3. Fill the salt reservoir with salt by using salt
funnel (D). To speed up dissolution rate of
salt in water, stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.