17
At the set time, the alarm will sound, gradually building up to the set volume. When the alarm sounds, the
corresponding icon will flash. For example when Alarm 1 sounds the Alarm 1 icon will flash.
Snooze
When the Alarm sounds and you would like to sleep for a little longer you can select a snooze time, which will allow
you to snooze for a period of either, 5, 10, 15 or 30 minutes. Use the remote control to change the snooze time. Once the
snooze time is over the alarm will sound again. You can select the snooze option as many times as you like. When
snooze is selected the radio will return to standby mode and the alarm icon will flash while the snooze function counts
down.
To activate the snooze function you can either press the Snooze Button on the remote control or the Select Button on
the keypad. Press Snooze Button on remote repeatedly until the time you wish to snooze is displayed as per above
image.
Setting the Backlight Level
With your Trio Micro System you can change the backlight (display light) settings, to ensure that as bright or dull as
you would like. In the backlight menu you set the Timeout time. This will be the amount of time the display will stray
bright for and then fade out. You can select between; light always on, 10, 20, 30, 45, 60, 90, 120 and 180 seconds.
The display has a backlight with three
brightness settings, an ambient light sensor and adjustable timeout. There are
three settings. You can adjust the On Backlight Level and the Dim Backlight Level, choosing between High, Mid and
Low.
To enter the Backlight Menu, press the
Menu Button
and then select the System Menu. Once in the System Menu
you can scroll through to select the Backlight option. Press the
Select Button
to confirm. Then use the
Navigation
Buttons
(< and >) and then
Select Buttons
to set the above options.
System Setup
System Setup