14
CONNECTION AND PREPARATION
_______________________________________
Connecting to a digital multi-channel audio/video
amplifier
The digital multi-channel sound of a DVD can best be decoded and played with
a multi-channel audio/video receiver (MPEG 2 multi-channel decoder or Dolby*
digital decoder).
1
Plug a standard optical cable into the »
OPT. DIGITAL OUT
« socket on the
DVD player and into the appropriate socket on the digital multi-channel
amplifier.
*
Manufactured under license from Dolby Laboratories Licensing Corporation. ”Dolby”, ”Dolby
Pro Logic”, ”AC 3" and the double-D symbol ”
g
" are trademarks of the Dolby Laboratories
Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
Note:
You have to activate the digital output on the DVD player and set the correct
digital output format (MPEG or PCM). Make sure to observe the settings
described in the ”Settings in the »Ton« menu” section on Page 39.
The audio/video receiver has to be able to process the DTS audio signal in
order to play a DVD with DTS. If it cannot, then you will not be able to hear
the DVD.
Connecting headphones
1
Plug the headphone plug into the »
PHONE
« socket on the DVD player.
Note:
The volume of the headphones is adjusted with the »
LEVEL
« knob.
D V D V I D E O C D C D P L AY E R
LEVEL
MIN.
PHONE
MAX.
0N /
VIDEO OUT
AUDIO OUT
R
L
OPT.
DIGITAL
OUT
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216 4,819,098, and 4,907,093 licensed for
limited viewing uses only.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved.
S-VIDEO OUT
TV SYSTEM
PAL NTSC
VIDEO OUT SELECT
RGB
S
