CONNECTION/PREPARATION
__________
Connecting an audio system with analogue
two-channel stereo sound
1
Plug a standard RCA cable into the »
R AUDIO OUT L
« on the
DV D player and in the corresponding socket on the audio sys-
tem.
Caution:
Do not connect the »
R AUDIO OUT L
« socket on the DVD
player to the PHONO (record player) input on the audio system.
Connecting the power cord
1
Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket after you have con-
nected the external devices.
Inserting batteries in the remote control
1
To open the battery compartment, press the catch and remove
the lid.
2
When inserting the batteries (for example, R06 or AA,
2 x 1.5 V), observe the polarity marked in the battery com-
partment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage cau-
sed by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dis-
pose of used batteries in accordance with local environmental
regulations.
14
