Grundig GDH 80 Y, Инструкция пользователя

Страница: 26 / 36

26
C
NOTE
• The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the
wet laundry and the laundry to
remain damp after the operation
ends.
• If a new program is selected
by changing the position of the
program selection knob while
your machine is in stand-by
mode, the running program ends.
• Laundry adding and removing can
be repeated as much as desired
during drying operation.But
this process would continuously
interrupt the drying operation,
and so would cause the program
duration to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the program starts.
WARNING!
• Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing program. The drum
surface is hot.
6.12 Canceling the program
If you want to cancel the program
and end the drying operation for
any reason after the machine starts
running, press the On/Off button.
A
WARNING!
• As it will be extremely hot inside
the machine when you cancel the
program while the machine is
in operation; run the ventilation
program to cool it down.
6.13 Program end
When the program ends, the Final/
Wrinkle Prevention, Fiber Filter
Cleaning and Water Tank Warning
leds on the program follow up
indicator light up. Loading door can
be opened and machine becomes
ready for a second run.
Press the On/Off button to turn off
the machine.
C
NOTE
• In case the laundry is not
removed after the program
is completed, the wrinkle
prevention program that lasts 2
hours start in order to prevent
wrinkling of the laundry that
remains inside the machine.
• Clean the fiber filter after each
drying. (See. „Fiber filter and
loading door inner surface“)
• Empty the water tank after each
drying. (See. „Emptying the water
tank“)