OSD Time Out: OSD display dwell time selection
(0-100 seconds)
OSD Rotation: OSD rotation adjustment
(Normal, 90, 180, 270)
Menu
Remark
Other:
Reset: Reset the monitor to default factory setting.
8 Care and Cleaning
CAUTION:
Turn off your MONITOR before cleaning.
You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to
occasionally dust the ventilation slots in the cabinet to help assure adequate
ventilation.
The Monitor’s screen may be cleaned with a soft, lint-free cloth as well. Take care
not to scratch or mar the screen. If necessary, you may use a cloth dampened with
warm water. While cleaning do not spray liquid directly on the screen, or allow
liquid to run down the screen and inside the Monitor. Also, never place drinks or
vases with water on top of the monitor. This could increase the risk of fire or shock
hazard or damage to the monitor.
9 Mounting your MONITOR to the wall
Caution: The wall mount must bear a minimum of five times the monitor’s net
weight without causing damage. To mount your MONITOR to the wall you need to
purchase a VESA wall mount. Purchase a VESA 100 x 100, KM4x 8mm (100 x 100,
for example, means the mounting measurements are 100mm horizontally and
100mm vertically; M4 x 8 mm is the type screw that needs to be used).
1. You need to remove the base first before attaching the wall mount.
A. Place the MONITOR face down on a surface that is soft, yet strong enough to
hold the MONITOR.
B. Use a screwdriver to remove the screws from the four holes on
each side of the bottom of the Monitor’s base (only use with base)
2. Make sure all cables are already connected to the MONITOR.
3. Follow the directions included with the wall mount to mount the monitor to the
wall.
_______________________________________________________
www.grundig-security.com
17
18
