Grundig GD-ML-AP2830UHD, Руководство пользователя

Страница: 12 / 12

12
This will reset the monitor and power supply.
No image on the screen:
‐
Ensure that the video signal cable (HDMI, DB ‐ 15, CVBS) is
properly connected to the display card/computer.
‐ Check the video signal cable (HDMI, DB ‐ 15, CVBS) connector on
both ends for bent or pushed ‐ in pins.
‐ The display card should be properly seated in its card slot.
‐ Ensure that the computer's power switch is ON.
‐ Ensure that the monitor's power switch is ON.
‐ Unplug the power cord of the monitor from the AC outlet, wait a
few minutes, then plug the power cord into the AC outlet again.
This will reset the monitor and power supply.
The Power LED is blinking (with no image on the screen):
‐
Check the video signal cable (HDMI, DB ‐ 15, CVBS) to ensure that
it is properly attached to the graphics display card.
‐ Check the video signal cable (HDMI, DB ‐ 15, CVBS) on both ends
for bent or pushed ‐ in pins.
‐ Make sure the computer is not in a power ‐ saving mode (move
the mouse or press a key on the keyboard).
No sound coming from the audio speakers:
‐
The audio cable should be connected to the line ‐ out on the
audio card and the line ‐ in on the monitor. Ensure that the audio
cable is properly connected.
‐ Inspect the audio cable for any apparent damage. Double ‐ check
by switching to another audio cable to see if the audio works.
_____________________________________________________
www.grundig ‐ security.com