Network Dome Camera
·
Quick Start Guide
23
5.
Connect the video output connector to the monitor and connect
the power connector to the power supply to adjust the surveillance
angle and image.
6.
Adjust the image and focus. Please refer to step 6 in section 2.2.1
for more detailed information.
7.
Install the dome cover back to the camera and tighten the lock
screw to complete the installation. Please refer to step 7 and step 8
in section 2.2.1 for more detailed information.
2.2.3
Pendant Mouting
Before you start:
Pendant mounting bracket is not included in package. If you choose
this mounting type, you have to prepare a bracket first. The pendant
mounting bracket shown below is only for demonstration.
Note:
When choosing a pendant mounting bracket, you must pay attention
to the size of the cap which should match the mounting base of the
camera.
