manualshive.com logo in svg

Grundig GCA-C2357V, Руководство пользователя

Поделиться
Скачать
Grundig GCA-C2357V Скачать руководство пользователя страница 9

BRIGHTNESS  [0~100] : 
Sets the value of auto exposure operations. 
As the value increases, the screen gets 
brighter.

SHUTTER  [x265, x128, x64, x32, x24, x16, x14, x12, x10, x8, x6, x4, x2, AUTO, OFF, 
FLK, 1/250, 1/500, 1/1000,1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000] : 
Control the image brightness by adjusting the shutter speed.

AGC (Auto Gain Control)  [HIGH, MANUAL, OFF, LOW, MEDIUM] : 
This function is used to create brighter images.
- HIGH: Wide range gain value adjustment.
- MANUAL: Select the gain value range under MANUAL AGC (-3dB~28dB).
- OFF: Disabled.
- LOW: Narrow range gain value adjustment.
- MEDIUM: Medium range gain value adjustment.

IRIS  [AUTO, MANUAL] : 
- AUTO: The iris is automatically activated upon illumination.
- MANUAL: This option is used for manual iris configuration. Select a value from 0 to 255 
under MANUAL IRIS.

MANUAL AGC: 
Please see AGC > MANUAL.

MANUAL IRIS: 
Please see IRIS > MANUAL.

SENS-UP LIMIT  [OFF, x1~x256] : 
This feature ensures clear images at night or under low light conditions.

6.3. WHITE BAL (White Balance)

This function is used to control the white balance under different lighting conditions. 
Adjusting the setting calibrates the camera for correct and natural colour rendering.

7

English

Содержание GCA-C2357V
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды