Here you can set the area of the HSBLC.
> HBLC (ON, OFF): You can turn the HBLC
ON or OFF.
> H. START (0~14): Here you can set the
starting position of the area from the left.
> V. START (0~14): Here you can set the
starting position of the area from the top.
> WIDTH (0~15): Here you can set the
horizontal size of the area.
> HEIGHT (0~15): Here you can set the
vertical size of the area.
DISP. MODE [NIGHT, ALL DAY] :
When HSBLC is chosen, you can set here when this function should be activated.
- ALL DAY: HSBLC will always be on.
- NIGHT: HSBLC will only be active in night mode.
6.6. DNR (Digital Noise Reduction)
This function is used to improve the picture quality by filtering the noise which is
generated under low bright light conditions. You can set different levels here.
3DNR MODE [OFF, ON, SMART] :
- OFF: Deactivated.
- ON: The compensation proportion will be
adjustable from 0 to 255 under 3DNR
LEVEL.
- SMART: The DNR level will be
automatically changed, depending on the
movement. The compensation proportion is
adjustable from 0 to 255 under 3DNR
LEVEL.
3DNR LEVEL [0~255] :
Please see SMART and ON under 3DNR MODE.
3DNR SENSE [0~100] :
When SMART is set under 3DNR MODE, you can set here a level between 0 and 100.
FDNR MODE [MANUAL, AUTO, OFF] :
Here you can set the FDNR (Fog Digital Noise Reduction) to OFF, MANUAL or AUTO.
The FDNR function improves the clarity of the image taken in poor conditions such as
fog, smoke, rain or snow.
FDNR LEVEL [0~31 or 0~10] :
If MANUAL is set under FDNR MODE, you can set here a level between 0 and 31. If
AUTO is set under FDNR MODE, you can set here a level between 0 and 10.
11
English
