Grundig GBP 7000 3D, Руководство пользователя

Страница: 15 / 81

15
ENGLISH
INITIAL SETUP
----------------------------------------------------------------------------------------------------------------------
6 Select »IP address« by using »
A
« or »
S
«
and press »
ENTER
«.
Enter the IP address by using the number but-
tons.
Select »Ok« by using »
S
« and press
»
ENTER
« to confirm,
or select »Cancel« by using »
s
« and press
» ENTER « to cancel the setting.
7 Select »Subnet Mask« by using » A « or » S «
and press »
ENTER
«.
Enter the Subnet Mask by using the number
buttons.
Select »Ok« by using »
S
« and press
»
ENTER
« to confirm,
or select »Cancel« by using »
s
« and press
»
ENTER
« to cancel the setting.
8
Select »Gateway« by using » A « or » S «
and press » ENTER «.
Enter the Gateway address by using the
number buttons.
Select »Ok« by using » S « and press
»
ENTER
« to confirm,
or select »Cancel« by using »
s
« and press
»
ENTER
« to cancel the setting.
Note:
7
The primary and secondary DNS (Domain
Name System) in the next setting are the
network adresses of the server allocated by
the provider.
9
Select »Primary DNS« by using » A « or
»
S
« and press » ENTER «.
Enter the Primary DNS by using the number
buttons.
Select »Ok« by using » S « and press
»
ENTER
« to confirm,
or select button »Cancel« by using »
s
« and
press »
ENTER
« to cancel the setting.
Network settings by using
wired connection
The device must be connected to a wired router
with an ethernet cable.
Please see chapter "CONNECTION AND PREP-
ARATION".
1
Press »
SETUP
« to open the main menu.
2
In the main menu select »Settings« by using
»
A
« or »
S
« and press » ENTER « to con-
firm.
3
Select »Network« by using » A « or » S «
and press » ENTER « to confirm.
6HWWLQJV
3DUHQWDO
6\VWHP
1HWZRUN
,QWHUIDFH
/LQN6WDWXV
0$&$GUHVV
,30RGH
,3$GUHVV
6XEQHW0DVN
*DWHZD\
3ULPDU\'16
6HFRQGDU\'16
6LJQDO6WUHQJWK
1HWZRUN1DPH66,' :LUHG
/LQN'RZQ
IEFF
0DQXDO
*RRG
JULQWHUQHW
'LVSOD\
$XGLR
/DQJXDJH
1HWZRUN
%'/LYH
4
Select »IP Mode« by using » A « or » S « and
press » ENTER « to confirm.
5 Choose the setting (»Dynamic« or »Manual«)
by using » A « or » S « and press »
ENTER
«
to confirm.
Notes:
7
The IP Mode option provides two configura-
tion modes for IP:
– Dynamic – Enables DHCP, the addresses
are automatically assigned by the router.
– Manual – Requires user to config-
ure network settings such as IP ad-
dress, subnet mask, gateway, etc.
It is able to show subnet mask, gateway,
primary DNS, secondary DNS when "IP
Mode" is set as "Manual".
7
If you choose the option "Dynamic", go to
step 11.
If you choose the option "Manual", continue
with step 6).