32/EN
TurboWash Function
(depends on model)
TurboWash impeller
located under the
lower impeller helps
washing your heavily
soiled dishes placed
in the right side of the lower basket. It will
give better results to place the most soiled
dish to the right front side.
Do not try to remove the TurboWash
impeller!
Express Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Steam Shine Function
(Depends on model)
It provides superior drying performance.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is active, the selection
indicator on the selected function key will
become on.
4. Close the door of the machine to start
the programme.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
TrayMaster Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
Perfect Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
TurboWash Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
Functions in Settings Menu
(depends on the model)
Under the settings menu of your product,
there are some additional functions that
depend on the model.
To access these functions, press and hold
the Menu key for 3 seconds. Press <- and
+> keys to move to the desired function or
setting.
In some models pressing the Menu
key only for once will allow you to enter
the Settings menu.
Use the selection key to change the
desired function or setting and switch off
your machine to save the Settings.
Submenu Functions:
(depends on the model)
Function Off/On