10
Connecting a hi-fi system
1
Plug a standard cinch cable into the »
AUDIO L R
« sockets (left/right)
on the digital receiver and the corresponding input sockets on the hi-fi
system.
Connecting a digital multi-channel amplifier
1
Plug a standard cinch cable into the »
DIGITAL
« socket on the digital
receiver and the corresponding socket on the digital multi-channel
amplifier.
Connecting the power cord
1
Plug the power cord supplied into the »
230V~/50Hz
« socket on the
digital receiver.
2
Plug the power cord into the wall socket.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or AA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3
Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
CONNECTION AND PREPARATION
_________________
AUDIO OUT
DIGITAL
L
R
OUTPUT TER.
INPUT TER.
VHF/UHF
5 V
ј
max. 30 mA
V
CR
RS 232
230 V
~
50 Hz
10 W max.
AUDIO OUT
DIGITAL
L
R
OUTPUT TER.
INPUT TER.
VHF/UHF
5 V
ј
max. 30 mA
