Grundig DSR 1750 MICRO, Руководство пользователя

Страница: 14 / 41

14
BASIC SETTINGS
__________________________________
Setting stations, Option 2
1
Switch on the television and select the preset channel for the
digital receiver.
2
Switch on the digital receiver by pressing »
Ǽ
«.
– The »Erstinstallation« page appears when the device is first
switched on.
3
Press »
OK
« to start initial setup.
4 Select your language using »
Ǹ
« or »
Ƿ
« and press » OK « to
confirm.
– The »Settings« menu appears.
5 Choose »Country« with » P+ « or » P- « and enter your country
using »
Ǹ
« or »
Ƿ
«.
6
Choose »Screen format« with »
P+
« or »
P-
« and enter the
screen format for your TV using »
Ǹ
« or »
Ƿ
«.
7
Choose »TV Output Format« with »
P+
« or »
P-
« and enter the
video signal for your TV using »
Ǹ
« or »
Ƿ
«.
8
Select »OK« with »
P+
« or »
P-
« and press »
OK
« to confirm the
entries.
– The »LNB settings« menu appears and the satellite Astra
19.2° East is set under »Position A«.
Note:
If you wish to receive several satellites and your receiver system
is equipped for this, you can make the settings required for this.
9 Select by pressing » P- « or » P+ «.
– »LNB control«:
DiSEqC 1. 0
Using a DiSEqC switch, you can receive up to four satellites
at once. Under positions A-D, you choose the corresponding
satellite for the relevant DiSEqC positions.
You can set the number of sequences for special systems
under »DiSEqC sequence«.
LNB supply from
Switching between LNB/satellites is switched off.
No DiSEqC
No power supply to LNB.
Toneburst
Toneburst enables you to receive up to two satellites simulta-
neously. In positions A-B, you choose the corresponding
satellite for the relevant position.