32
Deleting the track memory
1
Press »
MEMORY
« when the CD is in the stop position.
– The »
PROG.
•
« LED flashes.
2
Press »
STOP
7
«.
– The »
PROG.
•
« LED goes out.
Note:
The track memory is also deleted,
– If the CD compartment is opened,
– If the sliding switch »
CD MW FM FM STEREO
« (right side of the
device) is set to »
MW
«, »
FM
« or »
FM STEREO
«,
– If you pull out the mains cable.
Alarm mode
Selecting the alarm times
1
Set the sliding switch »
e
1 OFF ON ADJ
« or »
e
2 OFF ON ADJ
«
(left side of the device) to »
ON
«.
– Display: The »
e
1
•
« or »
e
2
•
« LED glows;
or
Activate both alarm times by setting the sliding switches »
e
1 OFF ON
ADJ
« and »
e
2 OFF ON ADJ
« (left side of the device) to »
ON
«.
– Display: The »
e
1
•
« and »
e
2
•
« LEDs glow.
Displaying the alarm times
1
Set the sliding switch »
e
1 OFF ON ADJ
« or »
e
2 OFF ON ADJ
«
(left side of the device) to »
ADJ
«.
– Display: the alarm time most recently set (1 or 2), flashes.
Note:
The sliding switches »
e
1 OFF ON ADJ
« and »
e
2 OFF ON ADJ
«
(left side of the device) should not both be set to »
ADJ
«, as then the
alarm times cannot be displayed and also cannot be set.
Alarm with signal tone
1
Set the sliding switch »
BUZZER MUSIC
« to »
BUZZER
«.
2
Set the sliding switch »
e
1 OFF ON ADJ
« or »
e
2 OFF ON ADJ
«
(left side of the device) to »
ON
«.
– Display: The »
e
1
•
« or »
e
2
•
« LED glows.
3
Press »
ON/OFF
« to switch the device to standby mode.
– The »
ON
•
« LED goes out.
– The device switches on at the set alarm times with the alarm signal
(alarm duration 90 minutes).
OPERATION
___________________________________________
