28
General functions
Switching on and off
1
Press »
ON/OFF
« to switch on the device from standby mode.
– The »
ON
•
« LED glows.
2
Press »
ON/OFF
« to switch the device to standby mode.
– The »
ON
•
« LED goes out.
Selecting the input source
1
Select the input source with »
CD MW FM FM STEREO
« (right side of
the device).
Adjusting the volume
1
Adjust the volume with »
VOLUME
|
« (right side of the device).
Listening with headphones
1
Connect the headphones to the »
0
« socket (ø 3.5 mm) (left side of the
device).
– This automatically switches off the loudspeakers.
Radio operation
For the best FM (VHF) reception, it is sufficient to direct the wire antenna.
The radio has a built-in rod antenna for MW reception. Turn the device aro-
und to direct the antenna.
Selecting the radio input source
1
Set the sliding switch »
CD MW FM FM STEREO
« (right side of the
device) to »
MW
«, »
FM
« or »
FM STEREO
«.
Tuning radio stations
1
Select the frequency band (FM or MW) with »
CD MW FM FM
STEREO
« (right side of the device).
2
Set the desired radio station with »
TUNING
« (right side of the device).
Stereo/mono reception
If the sliding switch »
CD MW FM FM STEREO
« (on the right side of the
device) is set to »
FM STEREO
«, the device can receive FM stereo stations. If
this is the case, the »
FM STEREO
•
« LED glows. However, if the signal
from the FM stereo station is weak, you can improve the sound quality by
switching to mono reception.
1
Use the sliding switch »
CD MW FM FM STEREO
« (right side of the
device) to switch from »
FM STEREO
« to »
FM
«, i.e. mono.
– The »
FM STEREO
•
« LED goes out.
2
Use the sliding switch »
CD MW FM FM STEREO
« (on the right side
of the device) to switch from »
FM
« to »
FM STEREO
«, i.e. stereo.
OPERATION
__________________________________________
