Grundig COREMAX M1 PROJECT GM, Руководство по обслуживанию

Страница: 94 / 98

ENGLISH 94
HOTEL TV SETUP
----------------------------------------------------------------------------------------------
Hotel TV is intended to prevent hotel guests from
changing TV’s channel settings and turning vol-
ume up to disturbing levels for the environment.
Therefore, "Source Setup" tab is not shown in
user menu.
Check whether the "Hotel TV" option under the
System Configuration tab in Service Menu is
"On" to perform the desired settings in HOTEL
TV. If the "Hotel TV" tab is ON in the service
menu, then we must open the "Hotel TV Settings"
menu and log in as "Admin" to perform any
operation in this menu.
7
Open the user menu by pressing “Menu”
button in order to open and make settings in the
Hotel TV Settings menu. On the Video Settings,
use password 4, 6, 5, 8 to turn off and on the
MENU once; thus you can access HOTEL TV
settings and get the authorization (admin mode)
to perform settings in HOTEL TV mode. Remem-
ber that Hotel TV settings shall not be displayed
when the TV is turned off and on again. Above-
stated procedures have to be repeated if any
change is to be made on the settings again.
7
On the Hotel TV settings menu, you can per-
form channel tuning, maximum initial sound
volume settings and whether TV will stay on
Stand-By or directly switch on when plugged in
(Hotel TV Settings menu).
7
The channels are tuned and favorite list is
determined over source setup. In customer
mode, TV is turned on at the channel and source
where it was turned off in admin mode. This
feature should be used to set TV’s opening chan-
nel. As an opening channel, you may set the
hotel's own advertisement channel with hotel's
videos or a channel advertising paid broad-
casts. In customer mode, it is not an error that
TV is turned on at the same source and channel
whichever channel or source was open when
turning off the TV. You should consider this
issue before switching TV to Stand-By in Admin
mode.
7
When setting up an Hotel TV, the easiest and
most convenient way is to perform all settings
on a single TV and copy the same configuration
to other TVs by means of cloning feature. Here,
you should make sure that TV is turned off at the
intended channel after completing set-up at the
admin mode.
7
"Cloner Configuration" menu has to be
opened in order to use the cloning feature from
the USB. Cloner Configuration menu can be
turned on by two ways. First one is to navigate
to the "Cloner configuration" tab and press 4,
6, 5, 8 keys. Another option is to press 4, 6, 5,
8 to enter Cloning menu in the Source Setup/
Program Table while you are in Hotel TV admin
mode.
In the Cloning menu:
"My Channel List", you can copy the channels
and favorites list you have created on the TV
to a USB stick or transfer a list which has previ-
ously been copied to the TV from the stick.
"My Satellite List" allows you to copy
the transponder list stored on the TV to a USB
stick or transfer a previously copied list to the TV
from the USB stick.
"Channel Set.", "Service Set." and "User Set."
are used to copy the user and service menu
settings on the TV to a USB stick or transfer
the settings on the USB stick to a TV. While the
installation is performed by the service agents,
these settings must not be transferred to the
television.