Grundig COREMAX M1 PROJECT GM, Руководство по обслуживанию

Страница: 26 / 98

ENGLISH 26
PICTURE / SOUND SETTINGS
---------------------------------------------------------
Enhanced picture settings
"Enhanced picture settings" are found in pri-
mary digital picture. However, these should
only be used when necessary when the picture
quality and transmission are excellent. They
may well improve the display with poor materi-
al, but may adversely affect the display where
transmission and picture quality are excellent.
7
»Vibrant Colour« – Increases the color
contrast and the contrast adjustment. This
setting is mostly too strong for use with
normal pictures and should only be used
where necessary (low or off). Otherwise,
nuances in the picture can be suppressed.
7
»Gamma« – This setting determines which
brightness value should be displayed for
which digital transmission value. Most
records are transferred in 2.2 gamma
value (All Windows computers and newer
MAC based computers operate on this
value while older MAC systems and
transfers without color profiles operate on
1.8 gamma value).
7
»Dynamic Contrast« – This function
dynamically and optimally adjusts the
contrast for the respective picture content
by analyzing images and then altering this
depending on a change in contrast. This
increase in the contrast however may also
reduce the visible brightness levels in the
picture.
7
»Perfect Clear« – Improves the general
image by means of a gentle blue hue (giv-
ing the appearance of greater sharpness)
and improves the black level by setting it
entirely to black from a specific shade of
back. This reduces visible grey values in
the dark areas of the picture.
7
»Film mode« detects and processes
feature films automatically for all channel
sources. This means that you get the opti-
mum picture at all times.
This functions in 480i, 576i and 1080i
modes in TV playback and for other chan-
nel sources.
If the »Film mode« is switched on for pro-
grams without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture may oc-
cur.
7
»Clarity« – Reduces the noise coming
from the signal. It should therefore be used
minimally provided that a good picture
material is present.
7
»Noise Reduction« – Reduces the noise
coming from the signal. It should therefore
be used minimally provided that a good
picture material is present.
7
»Block Noise Reduction« – This function
can only be selected with digital receiver
sources and AV pre-sets. It reduces any
interference from artefacts (pixel blocks)
from digital programs due to MPEG com-
pression (such as from DVB-T receivers and
lower transmission rates or DVD players).
Restore factory defaults
1 In »Picture« menu, select »Restore Default
Display Settings« with »
V
« and press
» OK « to confirm.
2
Press »Yes« to confirm the security query;
or
select »No« and press » OK « to cancel.
3
Press »
EXIT
« to finish the setting.
Ending the settings
1 Press » EXIT « to end the setting and quit
the menu.