Allixx SCC 5460 RDS / Allixx SCD 5490 RDS
Allgemeiner Teil / General Section
GRUNDIG Service
1 - 7
ENGLISH
15
9:
Beep – Signal tone on/off
– Display: »Beep On« – Signal tone for confirming
functions.
– Display: »Beep Off« – Functions are confirmed
by a brief muting of the loudspeakers.
10:
AM Band – On/off
– Display: »On« – The AM range can be selected.
– Display: »Off« – The AM range is switched off.
11:
SW Band – On/off
– Display: »On« – The KW range can be selected.
– Display: »Off« – The KW range is switched off.
12:
Search level– Search sensitivity
– Display: »Local« – Reduced search sensitivity.
– Display: »DX« – Immediate increased sensitivity.
13:
RDS Regional – Automatic changing of the
regional station
- Display: »On« or »Off«
– Display: »RDS Regional On« – Frequency
change only possible between regional stations.
– Display: »RDS Regional Off« – Station change
via automatic search.
14:
Date Format
– Display: »DDMMYY« or »YYMMDD«
15:
Clock »On«, »Off« or »RDS« (RDS synchro-
nisation)
Note: With RDS synchronisation, settings
16
-
18
disappear. When Time is Off, settings
15-19
disappear.
16:
Time setting
17:
Year setting
18:
Date setting
19:
Standby Clock – On or off. The time is dis-
played when the ignition is switched on.
20:
Ignition – Switching on and off
– Display: »Ignition On« – The car radio can be
switched on and off with the vehicle ignition.
– Display: »Ignition Off« – The device can only
be switched on and off by pressing »
IO
«.
EXPERT LEVEL _____________________________________________________________________________
ENGLISH
21:
MCD/Aux/MP3 Level setting
CD changer volume adaptation
(if connected).
22:
Tape Level/CD Level setting
Tape or CD unit volume adaptation.
25:
Display – Setting the positive or negative
display.
– Display: »Blue« or »White«.
26:
Displ. contrast – Setting the contrast for the
display field.
– Display: »Disp Contrast«, bordered display.
27:
Day/Night – Adaptation to the instrument
illumination.
– Display: »On« or »Off«.
16
CODING____________________________________________________________
ENGLISH
The code number for the device can be found on
the identity card. Coding is not activated by
default. When the coding is activated, the dev-
ice is electronically secure. Following removal, it
can only be switched on again if the code num-
ber is re-entered.
Activating coding
1
Select the EXPERT level by pressing
SOUND
until EXPERT appears in the display.
2
Select »
Protection
« using the
volume
knob
.
3
Press
SOUND
briefly.
– Display: »
----
« flashes.
4
Enter the code number by pressing memory
buttons »
1
« – »
4
« repeatedly.
Renewed operation when
coding is active
1
Switch on the car radio.
– Display: temporarily »
SAFE
«, then
»
1----
«.
– The »
1
« indicates the number of attempts
at entering the code.
2
Enter the code number using the station but-
tons »
1
«, »
2
«, »
3
«, »
4
«.
3
Press
SOUND
to confirm your entry.
– The radio is in operating mode.
Note:
Only enter the correct code number! Take
note of the increasing waiting time between
attempts.
After the sixth failed attempt we recommend
that you have a specialist dealer enter the
code.
The waiting time not elapsed is displayed.
Example: Code number 1703
»
1
« Press briefly once
»
1000
«
»
2
« Press briefly seven times »
1700
«
»
3
« Press briefly ten times
»
1700
«
»
4
« Press briefly three times
»
1703
«
5
Briefly press
SOUND
to confirm.
– Display: »
SAFE
« – Coding is activated.
6
To quit the EXPERT level hold down
SOUND
until you hear the signal.
Deactivating coding
1
If, for example, you want to remove the dev-
ice, select the EXPERT level and select
»
SAFE
« on the display.
2
To deactivate the coding, repeat steps
3
to
6
.
Содержание Allixx SCC 5460 RDS
Страница 28: ......
