Grundig 22 VLE 8320 BG, Руководство пользователя

Страница: 50 / 59

ENGLISH
­50
DiSEqC­1.2­Settings
You can adjust the alignment of the satellite an-
tenna to each individual satellite. These settings
will be saved so that the antenna can later be
easily guided to each saved alignment.
1 Select the line »DiSEqC 1.2 SETTINGS« with
» C «
or
» D «
and press » oK « to confirm.
– The »DiSEqC 1.2 SETTINGS« menu ap-
pears.
2 Select the preferred option with
» C «
or
» D «
.
– »Transponder«: »Press
oK
«, select the
transponder from which the signal is being
received with
»
B
«
,
»
A
«
,
» C «
or
» D «
and
press »
oK
« to confirm.
– »Moving Mode«: Use
»
B
«
or
»
A
«
to se-
lect the option »Discrete« or »Continuous«.
– »Discrete«: Moves the antenna in
defined steps to the west and the east.
– »Continuous«: Moves the antenna to the
west or east continuously.
– »Step Size«: Use
»
B
«
or
»
A
«
to select the
number of steps with which the antenna
should turn. »Step Size« is only active
when the »Transport Mode« was set to
»Discrete«.
– »Move Motor«: Aligns the antenna with
the selected satellite. Use
»
B
«
to align it
to »West«, use
»
A
«
to align it to »East«.
– »Go To Stored Position«: Aligns the antenna
to a saved satellite position. Up to 50 posi-
tions can be saved. »Press oK « and then
select the saved position with
»
B
«
or
»
A
«
.
Press
»
●
«
(green) to confirm – the anten-
na will be aligned with the saved position.
– »Store Stored Position«: The current anten-
na alignment is saved.
– »Limit Position«: Defines the range in
which the antenna may move. Use
»
B
«
to set the western limit, use
»
A
«
to set the
eastern limit.
– »Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
3
Press »
m
« to end the setting.
SpECIAL­SEttINGS
­----------------------------------------------------------------------------------------------------------