ENGLISH
28
uSBopErAtIoN
---------------------------------------------------------------------------------------------------------------
Connectingexternaldatamedia
Before connecting the external data medium it is
recommended to switch the television to stand-by
mode.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
7
If you use a network cable for external hard
disks which are connected to the »
uSB
«
socket on the television, this network cable
must also be disconnected from the power
supply when the television is switched off.
7
External data media may not be disconnect-
ed from the television set while files on the
data medium are being accessed.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not in itself an operating
mode. It is only an additional function.
1
Press »
8
«, »
1…0
« or »
p+
« or »
p-
« to switch
on the television from standby mode.
2
Connect the »
uSB
« socket of the television
and the corresponding socket on the data
device (external hard drive, digital camera,
card reader or MP3 player) using a USB ca-
ble;
removingtheexternaldata
media
Before removing the external data medium, log
off the data medium.
1
Open the menu with »
m
«.
2
Select the menu item »USB« with
»
C
«
or
»
D
«
and press »
oK
« to confirm.
3
Select the line »Safely Remove Disk« with
»
C
«
or
»
D
«
and press »
oK
« to confirm.
Note:
7
The data medium can now be removed from
the socket.
