Grundfos Redi-Flo Series, Инструкция по установке и эксплуатации

Страница: 5 / 16

5
PRE-INSTAllATION ChECKlIST
Components of Your Redi-Flo VFD System
Your Redi-Flo Variable Performance Pump system should contain the following
components:
. Redi-Flo Variable Frequency Drive, (See Figure )
2. Either a Redi-Flo2® (MP) pump and motor with lead (Figure 2) or a Redi-Flo4™ (SPE) Variable Performance
pump, motor, lead, lead/plug and RF4 x VFD adapter cord (Figure 3)
PRE-INSTALLATION CHECKLIST
1 3
Components of Your Redi-Flo VFD System
Your Redi-Flo Variable Performance Pump system should contain the following
components:
1. Redi-Flo Variable Frequency Drive, (See Figure 1)
2. Either a Redi-Flo2® pump and motor with lead (Figure 2) or a Redi-Flo4™ Variable
Performance pump, motor, lead, lead/plug and RF4 x VFD adapter cord (Figure 3).
Figure 1
Redi-Flo2®
Redi-Flo4®
Figure 2
Figure 3
To operate the system you will also need:
1. A discharge hose or pipe to connect to the pump (See Figure 4).
2. An electrical plug to connect the Redi-Flo VFD power cord to your portable
generator may be needed if the supplied plug is not compatible with your generator (See Figure 5).
3. Safety cable and hardware for lowering and lifting the pump (See Figure 6).
Redi-Flo2®
Figure 6 Figure 5
The exact type of plug used will depend
upon your generator, The Redi-Flo VFD
is supplied with a standard NEMA 5-15P,
115V, 3 prong plug.
Figure 4
Redi-Flo4®
To operate the system you will also need:
. A discharge hose or pipe to connect to the pump (See Figure 4).
2. An electrical plug to connect the Redi-Flo VFD power cord to your portable
generator may be needed if the supplied plug is not compatible with your generator (See Figure 5).
3. Safety cable and hardware for lowering and lifting the pump (See Figure 6).
4. The Redi-Flo VFD can alternately be operated from single-phase 230VAC supplies. This requires the
replacement of the standard power cord with a cord designed for 230V receptacles. Grundfos does not supply a
230V power cord.
PRE-INSTALLATION CHECKLIST
1 3
Components of Your Redi-Flo VFD System
Your Redi-Flo Variable Performance Pump system should contain the following
components:
1. Redi-Flo Variable Frequency Drive, (See Figure 1)
2. Either a Redi-Flo2® pump and motor with lead (Figure 2) or a Redi-Flo4™ Variable
Performance pump, motor, lead, lead/plug and RF4 x VFD adapter cord (Figure 3).
Figure 1
Redi-Flo2®
Redi-Flo4®
Figure 2
Figure 3
To operate the system you will also need:
1. A discharge hose or pipe to connect to the pump (See Figure 4).
2. An electrical plug to connect the Redi-Flo VFD power cord to your portable
generator may be needed if the supplied plug is not compatible with your generator (See Figure 5).
3. Safety cable and hardware for lowering and lifting the pump (See Figure 6).
Redi-Flo2®
Figure 6 Figure 5
The exact type of plug used will depend
upon your generator, The Redi-Flo VFD
is supplied with a standard NEMA 5-15P,
115V, 3 prong plug.
Figure 4
Redi-Flo4®
(MP)
(SPE)