English (GB)
11
12. Status (1)
When the RCME control cabinet is switched on, this status
display will appear. No settings can be made in this menu.
Fig. 6
Status
If the buttons on the control panel have not been touched for
15 minutes, the display will return to this display, and the back
light of the panel will be dimmed.
12.1 Electrical overview (1.1)
This display shows an overview of the various inputs and outputs.
The submenus in this display are described in the following
sections.
Fig. 7
Electrical overview
12.1.1 Analog inputs (1.1.1)
This display shows an overview of the individual analog inputs
and the current measured values of each input.
The factory configuration is shown in fig. 8.
Example
The AI1 analog input on the CU 361 (designated terminal 51) is
linked to the input "Level in collecting tank".
Fig. 8
Analog inputs
12.1.2 Digital inputs (1.1.2)
This display shows the status of the individual digital inputs.
The factory configuration is shown in fig. 9.
Example
The DI1 digital input on the CU 361 (designated terminal 10) is
linked to the input "Fault signal from feed pump".
Fig. 9
Digital inputs
Di
s
p
la
y
_
1
D
is
pl
a
y
_1.
1
D
is
pl
a
y
_1
.1.1
Di
s
p
la
y
_
1
.1.
2
