Grundfos LC A1, Инструкция по установке и эксплуатации

Страница: 7 / 100

English (GB)
7
7. Electrical connection
Figure 3 shows the position of the terminal blocks for
the control relay (connection of level switch) and the
alarm relay.
Fig. 3 Control and alarm relays
The socket function can be set at the terminal block.
See fig.
4 .
• Cont.:
The socket is used as a feed-through socket.
• NO (normally-open contact):
The socket will be switched on in case of fault.
• NC (normally-closed contact):
The socket will be switched off in case of fault.
This is the default setting for stop of a washing
machine.
Fig. 4 Terminal block, socket function
8. Technical data
Enclosure
Flame-retardant polystyrene according to UL 94 V-0
or 94 V-2, impact-resistant, bicolour, with integrated
socket (can be switched on or off), two cable glands
with cable relief, 2 x M12 x 1.5.
Power supply
230 V, 50 Hz, short-circuit-proof safety isolating
transformer.
No-load power consumption: 0.2 VA.
Power consumption in case of alarm: approx. 2 VA.
Input
Potential-free normally-open contact, min. 24 V,
75 mA.
Output
Potential-free contact, 3 A, 250 VAC or 3 A, 30 VDC,
short-term 5 A.
An acoustic alarm signal is possible by means of a
piezoelectric buzzer with a tone sequence signal of
97 dB / 1 m.
Ambient temperature
0-40 °C.
Dimensions
140 x 60 x 90 mm.
9. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
Subject to alterations.
TM
05 051
5 131
1
TM
05
05
16
13
11
Ext. out
Control relay
Alarm relay
Cont.