Grundfos KPL.700-1400, Инструкция по эксплуатации

Страница: 6 / 14

English (GB)
6
3.3 Filling oil
Fig. 5
Filling oil, KPL.700-800, KWM.700-800
Where nothing else is indicated, the position numbers refer to fig.
5 and/or the figure below each step.
1. Disconnect the rod (fig. 1 , pos. 12) from the handle (pos. 24).
2. Connect the handle (pos. 24) to the assembled oil pipe (pos.
35).
3. Disconnect the plug (fig. 1 , pos. 19) from the four-way tee
fitting on the assembled oil pipe (pos. 35).
4. Connect the funnel (pos. 13) to the intermediate fitting (fig. 1 ,
pos. 4).
5. Connect the assembled funnel and fitting to the assembled oil
pipe (pos. 35).
6. Fit the assembled funnel, fitting and oil pipe (pos. 35) in the
upper casing plug space (pos. 36). See fig. 5 .
7. Close the isolating valves (pos. 17 and 31).
8. Pour the recommended quantity of oil through the funnel (pos.
13). See section
5. Oil quantity
.
9. After completing the oil filling, disconnect the assembled oil
pipe (pos. 35).
10. Refit the plugs (fig. 3 , pos. 26 to 29).
TM
06
31
98
50
14
Pos. Description
13 Funnel
17 Isolating valve
24 Handle
31 Isolating valve
32 Upper oil plug space
34 Non-return valve
35 Assembled oil pipe
36 Upper casing plug space
TM
06
3
199
50
14
T
M
06
32
00
50
14
TM
06 32
01 501
4
13
24
34
32
17
31
35
36
Oil
24 12
24 35
19
35
TM0
6
320
2
5
0
1
4
TM
06
3
203
50
14
Note
The non-return valve (pos. 34) prevents oil from
leaking.
Note
The air inside the oil chamber escapes through
the upper oil plug space (pos. 32) due to the
difference in diameter.
13 4