Grundfos DTS, Инструкция по установке и эксплуатации

Страница: 10 / 140

English (GB)
10
3.5 Materials in contact with media
Fig. 6 Components that come into contact with media
TM
05
93
21
37
13
4.2
6
7 (7.1, 7.2, 7.3, 7.4)
9.2
10.4
3.2
3.2.1
3.1
3.2.2
8
5.1.2, 5.1.3
3.3
5.1
(5.1.1)
10 (10.1, 10.2, 10.3)
1
4 (4.3)
2
5.1.5
9.1
4.1
5.1.4
5.2.2,
5.2.3
5.2.1
5.2.4
5.2.5
5.2
Pos. Description Material
1 Dosing tank PE
2 Collecting tray PE
3 Mixer or stirrer
3.1 Handheld mixer PE
3.2 Electric stirrer
3.2.1 Shaft SS 1.4571, PP
3.2.2 Propeller PP
3.3
Level switch for electric
stirrer
PE
4 Installation material
4.1 Screws and washers
Tank sizes 60-500 l:
SS 1.4541 (screws),
SS 1.4301 (washers);
Tank size 1000 l: PP
4.2
Connection kits (only
DDI and DMX)
PP, PVC
4.3
Mounting plate (only
DDA,DDC,DDE)
PPO/PS 20 % GF
5 Suction line
5.1
Rigid suction lance with
suction line
5.1.1 Rigid suction lance PE
5.1.2 Valve ball Ceramic Al
2
O
3
99.5 %
5.1.3 Valve seat PTFE
5.1.4 Gasket FKM, EPDM or PTFE
5.1.5 Suction line PE
5.2
Flexible suction line
with foot valve
5.2.1 Foot valve PE
5.2.2 Valve ball Ceramic Al
2
O
3
99.5 %
5.2.3 Valve seat PTFE
5.2.4 Gasket FKM, EPDM or PTFE
5.2.5 Suction line PE
6 Discharge line PE or braided PVC
7 Injection unit
7.1 Body PVC or PP
7.2 Gaskets FKM, EPDM or PTFE
7.3 Spring Tantal
7.4 Ball Ceramic Al
2
O
3
99.5 %
8 Drain valve PVC/EPDM
9 Filling device
9.1 Filling armature PVC/EPDM
9.2 Dissolving hopper PVC/EPDM
10 Multi-function valve
10.1 Body PVDF
10.2 Gaskets FKM, EPDM or PTFE
10.3 Diaphragm PTFE
10.4 Relief line PE
Note
For more details, refer to the installation and
operating instructions of the components.
Pos. Description Material