Grundfos DP 10 Series, Инструкция по установке и эксплуатации

Страница: 3 / 40

English (GB)
3
2. General description
This booklet includes instructions for installation,
operation and maintenance of Grundfos DP and EF
submersible drainage and effluent pumps with
motors of 0.6 to 2.6 kW. Grundfos DP and EF pumps
are portable and designed for pumping domestic and
industrial drainage and effluent.
Two types of pumps are available:
•
DP 10.50 and DP 10.65 drainage pumps with
semi-open impeller
• EF 30.50 effluent pump with semi-open impeller.
The pumps can be installed on an auto-coupling
system or stand freely on the bottom of a pit.
The pumps can be controlled via the Grundfos LC,
LCD 107, LC, LCD 108, LC, LCD 110 pump
controllers or the Grundfos CU 100 control box. See
installation and operating instructions for the
selected controller.
2.1 Product drawings
Fig. 1 DP 10.50 pump
Fig. 2 DP 10.65 pump
Fig. 3 EF 30.50 pump
2.2 Applications
DP 10 pumps are designed for pumping these
liquids:
•
drainage and surface water
• groundwater
• industrial process water without solids or fibres.
EF 30 pumps are designed for pumping these
liquids:
•
drainage and surface water with small impurities
• wastewater with fibres, e.g. from laundries
• wastewater without discharge from toilets
• effluent from commercial buildings without
discharge from toilets.
The compact design makes the pumps suitable for
both temporary and permanent installation.
The pumps can be installed on an auto-coupling
system or stand freely on the bottom of the pit.
TM0
6
598
1
0
3
1
6
T
M
06
58
85
03
16
1
2
3
5
6
7
8
9
10
4
9
10
1
2
5
6
7
8
TM0
6
590
6 031
6
Pos. Description
1 Cable plug
2 Nameplate
3 Outlet port
4 Outlet flange DN 65, PN 10
5 Lifting bracket
6 Stator housing
7 Oil screw
8 Clamp
9 Pump housing
10 Inlet strainer (DP pumps only)