10
INSTALLATION INSTRUCTIONS
MECHANICAL INSTALLATION
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
NOTE
The sound system is designed for the installation in a spare wheel recess in the trunk, which should have at least a diameter of about
50 cm and a height of 15 cm. Use preferably the possibly existing locking device of the spare wheel to tighten the sound system through
the hole in the center.
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gastank or the like.
Ensure that the chosen location provides a sufficient air circulation for the sound system. Do not mount the device into small or sealed
spaces without air circulation near by heat dispersing parts or electrical parts of the vehicle.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses and interferences.
