Cleaning, inspection, maintenance
52 | 72
B
A
_
T
D3
-A
M
0
0
1
e
n
_
0
1
4
_
M
X
A
.d
o
cx
Closing the filter
1.
Fit the O-rings to the filter elements. Slide the filter elements with the larger Ø
pointing forward over the suction nozzle into the housing of the filter.
2.
Position the sieve bottom between the pipe nozzle and the lower suction nozzle.
3.
Screw the lower suction nozzle onto the pipe nozzle until the O-ring is just not
visible any longer.
4.
Slide the filter funnel onto the suction nozzle
– the two flat faces of the filter funnel
must be parallel to the wrench flat at the suction nozzle.
5.
Screw on the filter funnel clockwise.
6.
Put the filter into operation
– refer to chapter 6.
» The filter is ready to use.
