CLEANING BARE FLOORS
Your Steam Cleaner is designed to clean bare floors such as ceramic tile, vinyl,
laminate, marble, stone and sealed hard wood floors. Use of your Steam Cleaner
on waxed or some unwaxed floors may result in a diminished glossiness. The
Steam Cleaner should not be used on unsealed wood floors. For best results test
in an inconspicuous area or check the care instructions from the flooring
manufacturer.
Sweep or vacuum floor prior to steam cleaning
Slowly pass over surface to be cleaned while pressing trigger to emit
steam.
To sanitize an area of your floor, leave the Steam Mop over the area for a
minimum 15 seconds, but no longer than 20 seconds.
When the Steam Cleaner stops emitting steam, simply unplug the
Cleaner, remove the Water Tank, refill, and continue cleaning.
Note:
During first use, it may take several seconds for the Steam Cleaner to
produce steam. The water needs to flow through the filter to the heater. This
delay will only occur during initial use.
WARNING:
Accessories should be attached with Handy Steamer (Part 13) when in
use. Unplug your Steam Cleaner and ensure that it has cooled down
before attaching accessories.
STORING THE CLEANER
Unplug Power Cord (Part 19) from outlet and let the cleaner cool down
Carefully remove Mop Pad (Part 16) from Swivel Head (Part18).
Any water remaining in the Water Tank (Part 9) should be emptied prior to
storing the unit.
Mop Pad (Part 16) can be machine washed in hot water and tumble dried.
Page 12 of 14
