7
17. Unscrew both Pushers
(15) using wrench (size
25 mm).
18. Remove both Pushers
(15), Springs (17), Pusher
Nuts (18) & Pusher
Buttons (19).
19. Using two wrenches (size
10 mm), hold Plunger Rod
(9) & turn Connecting
Rod (43) anticlockwise.
This will unscrew
Connecting Rod (43).
20. Remove Connecting
Rod (43) along with
Washer (42), Spring (41),
Seal Support (40), Seals
(39) & Slider Guide (38).
If Connecting Rod (43) is
still attached to the inner
rod of Slider (30),
hold
the inner rod in a vice &
unscrew Connecting Rod
(43) with wrench (size 10
mm).
21. Remove Slider (30) with a
tweezer.
22. Open the two Screws
(29) with a Philips
screwdriver & remove
Clip (28).
23. Remove Nylon Slider (27).
24. Remove Slider Guide (26).
25. Remove Seat (25) &
Paper Seal (24). Clean
the bottom surface
thoroughly.
