6
8. Remove Coupler (44).
Pull Extension Rod (48)
so that Piston (53) also
comes out of barrel (55).
9. Remove outlet adapter
(35) with wrench (size
28).
10. Unscrew Exhaust valve
(23) with a wide jaw plier.
11. Hold Air Motor Assembly
in a soft-jaw vice. Loosen
both Coupling Nuts (2)
using wrench (size 21
mm).
12. Remove Bend Pipe (1)
along with both Coupling
Nuts (2) & Sealing Rings
(3).
13. Unscrew both Bends (4)
using wrench (size 13
mm).
14. Lightly tap Cylinder (10)
with a plastic hammer &
unscrew it .
15. Unscrew Inlet Cover
Adapter (34) using wrench
(size 25 mm).
16. Connect a caliper wrench
into the holes on inlet
Cover (32) & unscrew it
anticlockwise.
