19
GROWSPAN
™
ROUND PRO GREENHOUSES AND SYSTEMS
Revision date: 01.23.19
INSTALL END WALL FRAME (NO DOOR)
End framing for remaining wall is assembled the same. If
wall includes optional double door kit (additional purchase
required), repeat previous procedure.
CONSULT QUICK START SECTION FOR ADDITIONAL
FRAMING INFORMATION.
If end wall
does not include
an optional double door kit,
install vertical frame members as shown below.
1. Join and cut tubes to required lengths and attach to
construct base tube.
2. Attach vertical frame supports at top and bottom as
previously described.
3. Continue by installing end panels.
TAPE SHARP EDGES AND CONNECTORS
After entire frame is assembled, check frame for sharp
edges that could damage cover film. File these smooth or
tape over them using supplied duct tape.
In addition, return to rafters and apply tape over each
connector to better protect cover film when it is installed.
The following photo shows one way to apply tape.
Rafter and frame shown above may differ from actual
frame. Photo is used to illustrate how to apply tape.
Duct tape
over connector
