Growcol GHyper 3000 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 52

Growcol GHyper 3000 Скачать руководство пользователя страница 42

38

7.4.2 Install the APP and Connect to the Inverter

Preparation

a. Power the inverter and/ or Wi-Fi router on;

b. Make sure the Wi-Fi stick is connected to the inverter and the network is
configured.

Procedure:

Step 1: Install Propower APP

•

Search for the keyword "

Propower

" from Google Play Store or Apple

AppStore, download and install the latest version of the monitoring software
for free

Step 2: Connect to the inverter

•

Confirm the network information connected to the inverter before starting.
There are two ways to connect APP to the Inverter. One is to connect to the
same wireless network of the router, and the other way is to connect to the Wi-
Fi stick’s network (Wi-Fi name is AP_*******).

•

Open the APP, click the arrow on the upper right corner of home page;

•

Search the inverter ID, and connect to target inverter;

•

If it is successfully connected, the home page will show the general status of the
inverter. One can also check the detailed status in the Parameter interface.

«
...
40
41
42
43
44
...
»

Содержание GHyper 3000





















































Отзывы:

Нет отзывов