Growcol GHyper 3000, Руководство пользователя, Страница: 22 / 52

18
Step 4: Drill holes on the wall
Using a drill and level, measure and determine the positions for the inverter and
the battery to the selected wall.
• Be sure to choose a flat wall.
• The height of the holes from the ground must be ≥ 400mm
• Drill holes with driller(Drill bit: φ12), make sure the holes are deep enough
(at least 65mm)
Step 5: Secure the Battery-bracket on the wall
a) Insert the expansion bolts (M12*4) into the holes and secure with a hammer.
b) Fasten the nut with a wrench to expand the bolt.
c) Remove the nut, spring washer, and flat washer, and store them properly.
d) Fix the Battery-bracket with expansion bolts.
e) Tighten the bracket using the Expansion bolts.
Be sure to mount the bracket vertically.