74
The blades last for about three months provided that
there is no contact with obstacles. Always replace all
three blades at the same time so that the cutting disc is
in balance.
Use a screwdriver to dismantle the blades and to screw
the new ones on.
Check that the blades can move around these screws
once they are fitted to the cutting disc.
The robot lawnmower is equipped with a maintenance-
free lithium-ion battery.
If the robot lawnmower will not be used for a prolonged
period, the battery should be charged fully once every
three months.
Winter storage
The robot lawnmower, charging station and power
supply must be put into winter storage at the end of the
season and before the frosty weather arrives. The parts
must be stored in a clean, dry and frost-free place.
Clean the robot lawnmower as described above.
Lubricate the blades with a lubricating spray or similar.
Charge the battery manually (see “Manual charging”
under point 6) Low battery voltage
Push the on/off switch to OFF.
The boundary cable can be left in the garden, but its
connections should be protected with insulating tape
and waterproof grease or similar to prevent corrosion.
Remember to charge the battery manually at least every
three months while the robot lawnmower is in storage.
