73
GB
17) The robot lawnmower runs in circles along the
boundary cable
There is a live cable in the ground near the boundary
cable. Move the boundary cable.
If the robot lawnmower has registered the boundary
cable more than X times and has moved a few metres
away from the most recent registration point, it runs
around in a spiral trajectory to improve its coverage of
the lawn.
18) The robot lawnmower is very noisy
If the robot lawnmower makes more noise than normal,
check the following:
• Are the blades damaged?
Change all the blades and screws at the same time.
• Are the blades blocked?
Remove any foreign objects (ropes, plastic, tape, etc.)
from the blades.
If there is noise from the motors that turn the cutting
disc or wheels, the robot lawnmower must be inspected
by a professional.
Cleaning and maintenance
Caution!
• Always put the main switch in the OFF position
before performing any form of cleaning or
maintenance on the robot lawnmower.
• Wear work gloves to avoid cutting yourself on the
blades.
• Make sure that no water penetrates the robot
lawnmower. The robot lawnmower must not be
rinsed or washed in running water.
The robot lawnmower should be cleaned regularly.
Wipe the exterior of the robot lawnmower with a damp
cloth.
Clean the robot lawnmower’s charging socket and the
charging poles on the charging station with a small
brush or similar, and remove any dirt or deposits with a
small piece of very fine sand paper.
Adjust the cutting height to the lowest setting and turn
the robot lawnmower upside down.
Clean the cutting disc and the blades using a soft brush
or a damp cloth with a mild detergent, if necessary.
Check that the cutting disc can rotate freely.
Remove grass clippings, soil and mud from the wheels.
If any of the parts on the robot lawnmower are
damaged, worn or defective, they must be replaced
with the corresponding original parts.
