2
Description
Page
To The Owner, Maintenance, Safety Precautions, Torque Specifications & Warning
2-3
Unpacking Components, Undercarriage Installation & Assembling Lift Components
4
Installing Hydraulic Coupler Components
4
Lift System
5
Tractor Side & Blade Side Hydraulic Hose Routing
6-7
Initial Startup
8
Connecting and Disconnecting the Blade
9
Skid Shoe and Tilt Plate Adjustment
9
Blade Assembly
10-11
NANT Assembly
12-13
Blade Hydraulics
14
Hydraulic Schematic
15
Name Plate
16
Blade Hydraulic Schematic
17
Multi-Couplers
18-19
Contact Us, Improvements, & Warranty
20
Contents
To The Owner
This manual contains information concerning the operation, adjustment, and maintenance of the 3-5 blade assembly. You
have purchased dependable, long lasting equipment, but only by proper care and operation can you expect to receive the
performance and long service built into our products. Please have all operators read this manual carefully and keep the
manual available for ready reference. If you have any questions or concerns, contact Grouser Products.
Maintenance
Due to the harsh environment your equipment operates in, the following tasks should be
performed every 10 hours or less.
• Inspect all equipment before operation for existing or potential damages.
• Lubricate all joints with high quality grease.
• Inspect and tighten all bolts to torque specifications on page 3.
• Check replaceable cutting edge for wear ensuring there is enough material to prevent permanent damage to the
blade.
• Make sure all non-rotating pins are secured properly.
• Check hydraulic cylinders and hoses for damage or leaks.
• Check skid shoes for wear and replace if necessary. For adjustment, see page 9.
• Inspect all tilt-ways for aggressive wear. See page 9 for tilt plate adjustment.
