3
Safety Precautions
A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To
help prevent accidents, read and take the following precautions before operating this equipment. In addition
to these precautions, please follow all safety and operational instructions of your tractor manufacturer.
The Dozer:
1. The 760 Dozer should be operated only by those who are responsible and instructed to do so.
2. Read the owner’s manual carefully before using this equipment. Lack of operating knowledge can lead to
accidents.
3. Keep the dozer maintained in reliable and satisfactory condition to ensure your safety.
4. Make sure the area is clear of people before moving any equipment.
5. Do not modify or permit anyone else to modify or alter the equipment and its components without first
consulting Grouser Products.
Servicing the Dozer:
1. Read and follow all safety instructions provided by the tractor manufacturer.
2. Always use proper personal safety gear when performing maintenance on equipment.
3. Before servicing, relieve hydraulic pressure, stop engine and fully engage parking brake.
4. Escaping hydraulic fluid under pressure can penetrate skin causing serious injury. If fluid is injected into
skin, obtain medical attention immediately.
– DO NOT use your hand to check for leaks. Use a piece of cardboard or paper to search for leaks.
– Stop the engine and relieve pressure before connecting or disconnecting lines.
– Tighten all connections before starting the engine or pressurizing lines.
Storing the Dozer:
1. Thoroughly clean the inside and outside of the dozer before storage. Use paint where necessary to
prevent rust.
2. Check the dozer for worn or damaged parts. Install new parts as required.
3. Lubricate all pins and joints.
Torque Specifications
All bolts should be tightened to the specifications that are stated. If specifications are not stated, follow torque
charts below.
Torque - Dry (ft–lbs)
SAE Grade 5
SAE Grade 8
Size
UNC
UNF
UNC
UNF
5/16
17
19
24
27
3/8
30
35
45
50
7/16
50
55
70
80
1/2
75
85
110
120
9/16
110
120
150
170
5/8
150
170
210
240
3/4
260
300
380
420
7/8
430
470
600
670
1
640
720
910
1020
Torque - Dry (ft-lbs)
Size
Grade 10.9
M18 x 2.50
284
M20 x 2.50
401
M22 x 2.50
547
M24 x 3.00
694
