HOTRONIX
®
FUSION
™
HOTRONIX
®
FUSION
™
15
10.
10.5
10.4
10.2
10.3
10.1
S E R V I C E H O T L I N E : 8 0 0 . 7 2 7 . 8 5 2 0 H O T R O N I X . C O M
Presets Setup
Prepare to Print
To begin Printing / Pressing, go to the Main Menu and select “Operation” to enter the Operation screen. (10.1)
Note:
Be sure you have the correct Preset selected for your application.
You may also manually adjust your
desired Time, Temperature and
Pressure settings (refer to pg 8).
Note:
Be sure the Actual press
Temperature has reached the
Target Temperature, (10.2)
When the desired settings are reached you may begin to Print / Press.
When using the “Swing” feature:
Swing the heat platen out and
position the garment and
application. (10.3)
When using the “Draw” feature:
Pull out the lower platen and
position the garment and
application. (10.4)
Swing the heat platen or push the lower platen back into position. Then lower the heat platen into the press position.
The Timer display will automatically initiate a count down and visually and
audibly signal you when to lift the platen off the garment. Immediately lift
the platen to the UP position. (10.5)
Swing the heat platen or pull the lower platen away and proceed
according to your application’s instructions.
Your equipment has automatically reset and you may continue to
Print / Press.
Printing / Pressing
3/19/10 2:08 PM
Main Menu
Operation
About
Shutdown
3/19/10 2:08 PM
Main Menu
Operation
About
Shutdown
3/19/10 2:10 PM
New Preset 1 : 8s, 10s, 330F, 5PR
330
F
5
PR
Counter : 1
Main Menu
330
F
5
S
3/19/10 2:10 PM
New Preset 1 : 8s, 10s, 330F, 5PR
330
F
5
PR
Counter : 1
Main Menu
330
F
1
S
