Capital Business Park
Cardiff, CF3 2PZ
groupscs.co.uk
Smoke Control System
EV-HMI7B User Manual
SW Version: 1C
SCS-OM-03-V1_06-2022
Page | 4 of 14
2.
User Interface
The HMI is the user interface to the smoke shaft system and provides system information and functions
including:
•
Alarms, faults, and events
•
System reset
•
Diagnostics and maintenance features
The HMI should be located at the firefighter
’s entrance or command location to provide
alarm status for
firefighters and easy operation and access for maintenance activities.
The HMI is a colour touch screen is in landscape style. The touch screen is resistive type and operating the
screen can be done by finger touch or by a stylus or pointer.
A USB flash memory module is inserted at the back of the HMI for storing event logs and backup files. To
access the module, remove the screw located at the bottom of the bezel then open the hinged fascia door.
DANGER:
Risk of electrocution. Observe electrical safety procedures and check power supply has
been isolated or disconnected safely before removing panel covers.
HMI User interface
HMI Rear
A.
Touch Display
–
Colour display showing graphical status and touch function buttons
B.
USB Memory Module - Stores event logs and backup files.
C.
COM Port
–
Communication connection to interface panels
E
A
D
